Saturday, November 14, 2026

Working Model #17


Here is what I mean and you can see that I have made several attempts at getting this right; for attaching a tail-fin the wrong way around is a sacking offence here at TELEDRONE as well it might be at both Airbus and Boeing. That last one, maybe not so much.

All you have to remember is that the back end of the pair of fins should converge toward the trailing edge of the tail-plane. I don't want to over-do this and so all I have done is to sketch where the fin was on the mock-up and then just cant it off to one side at the rear by around the same width.

You might think such things never happen in aviation, though the Airbus 320 has engines with a fin on the inboard side of the nacelle that alters the airflow over the leading edge of the wing and its slats. When something didn't seem quite right on one aircraft after an engine change it turned out the fin had ended up on the right side in both cases viz. correctly beneath one wing, but incorrectly on the other. This aside jets are not 'handed' tho' as with propellers driven by reciprocating engines, the core of UK engines turns in the opposite direction to those from the US.