The curvature of the monoski can be adjusted in any of three ways:
(a) by adjusting the stiffness along its length by artificial means
(b) a wedge at the prow which adjusts the angle of projection
(c) by adjusting the dimensions of the craft generally
I am going for the easiest option of the three and altering the length of the craft as it appears currently. The deck is 24" wide and 26" long and I want the overall length to be around two and a half times the length of the deck.
To enable this I reduce the length of the laterals to 67" or 1700mm and the reason this measure is two inches (or 50mm) over is that these will be lost to the curvature of the prow.
